RSGB Band Plan (effective from 1st January 2018)
	The following band plan is largely based on that agreed at IARU Region 1 General Conferences with some local differences on
	on frequencies above 430 MHz.
	50 MHz (6m)	Necessary	UK Usage
		Bandwidth
	50.000-50.100	500 Hz	Telegraphy Only (except for Beacon Project) Note-2
			50.000-50.030 MHz reserved for Synchronised Beacon Project (Note 2)
			Region-1: 50.000-50.010;  Region-2: 50.010-50.020;  Region-3: 50.020-50.030
			50.050 MHz   Future International Centre of Activity
			50.090 MHz   Intercontinental DX Centre of Activity (Note 1)
	50.100-50.200	2.7 kHz	SSB/Telegraphy - International Preferred
			50.100-50.130 MHz  Intercontinental DX Telegraphy & SSB (Note 1)
			50.110 MHz   Intercontinental DX Centre of Activity
			50.130-50.200 MHz  General International Telegraphy & SSB
			50.150 MHz   International Centre of Activity
	50.200-50.300	2.7 kHz	SSB/Telegraphy - General Usage
			50.285 MHz   Crossband Centre of Activity
	50.300-50.400	2.7 kHz	MGM/Narrowband/Telegraphy
			50.305 MHz   PSK Centre of Activity
			50.310-50.320 MHz   EME
			50.320-50.380 MHz   MS
	50.400-50.500		Propagation Beacons Only
	50.500-52.000	12.5 kHz	All Modes.
			50.510 MHz SSTV (AFSK)
			50.520 MHz   Internet voice gateway (10 kHz channels), (IARU common channel)
			50.530 MHz   Internet voice gateway (10 kHz channels), (IARU common channel)
			50.540 MHz   Internet voice gateway (10 kHz channels), (IARU common channel)
			50.550 MHz   Image/Fax working frequency
			50.620-50.750 MHz   Digital communications
			50.630 MHz    Digital Voice (DV) calling
			50.710-50.890 MHz   FM/DV Repeater Outputs (10 kHz channel spacing)
			51.210-51.390 MHz   FM/DV Repeater Inputs (10 KHz channel spacing) (Note 4)
			51.410-51.590 MHz   FM/DV Simplex (Note 3) (Note 4)
			51.510 MHz FM calling frequency
			51.530 MHz   GB2RS news broadcast and slow morse
			51.650 & 51.750 MHz   See Note 5 (25kHz aligned)
			51.770 & 51.790 MHz   See Note 5
			51.810-51.990 MHz.  FM/DV Repeater Outputs  (IARU aligned channels)
	Note 1: Only to be used between stations in different continents (not for intra-European QSOs).
	Note 2: 50.0-50.1MHz is currently shared with Propagation Beacons. These are due to be migrated by Aug-2014
	to 50.4-50.5 MHz, to create more space for Telegraphy and a new Synchronised Beacon Project
	Note 3: 20 kHz channel spacing. Channel centre frequencies start at 51.430 MHz.
	Note 4: Embedded data traffic is allowed with digital voice (DV)
	Note 5: May be used for Emergency Communications and Community Events
	Note 5: May be used for Emergency Communications and Community Events
	Note-6: Digital Experiments to support innovation may occur at 50.6, 51.0 or 51.7 MHz with a 100kHz maximum bandwidth
	LICENCE NOTES: Amateur Service 50.0-51.0 MHz - Primary User.
	Amateur Service 51.0-52.0 MHz - Secondary User: 100W (20dBW) max
	Available on the basis on non-interference to other services (inside or outside the UK).
	Notes to the Band Plan
	ITU-R Recommendation SM.328 (extract)
	Necessary bandwidth: For a given class of emission, the width of the frequency band which is just sufficient to
	ensure the transmission of information at the rate and with the quality required under specified conditions.
	The use of Amplitude Modulation (AM) is acceptable in the all modes segments but users are asked to consider
	adjacent channel activity when selecting operating frequencies.
	Foundation and Intermediate Licence holders are advised to check their licences for the permitted power limits and
	conditions applicable to their class of licence.