RSGB Band Plan (effective from 1st June 2016)
	The following band plan is largely based on that agreed at IARU Region 1 General Conferences with some local differences on
	on frequencies above 430 MHz.
	70 MHz (4m)	Necessary	UK Usage (Note 1)
		Bandwidth
	70.000-70.090 MHz	1 kHz	Propagation Beacons only
	70.090-70.100	1 kHz	Personal Beacons
	70.100-70.250	2.7 kHz	Narrow Band modes
			70.185 MHz    Cross-band activity centre
			70.200 MHz    CW/SSB calling
			70.250 MHz    MS calling
	70.250-70.294	12 kHz	All Modes
			70.260 MHz    AM/FM calling
			70.270 MHz    MGM centre of activity
	70.294-70.500	12 kHz	All modes channelised operations using 12.5 kHz spacing.
			70.3000 MHz
			70.3125 MHz   Digital modes
			70.3250 MHz   DX Cluster
			70.3375 MHz   Digital modes
			70.3500 MHz   Internet voice gateway (Note 2)
			70.3625 MHz   Internet voice gateway
			70.3750 MHz   See Note 2
			70.3875 MHz   Internet voice gateway
			70.4000 MHz   See Note 2
			70.4125 MHz   Internet voice gateway
			70.4250 MHz   FM simplex - used by GB2RS news broadcast
			70.4375 MHz   Digital modes (special projects)
			70.4500 MHz   FM calling
			70.4625 MHz   Digital modes
			70.4750 MHz
			70.4875 MHz   Digital modes
	Note 1: Usage by operators in other countries may be influenced by restrictions in their national allocations
	Note 2: May be used for Emergency Communications and Community Events
	LICENCE NOTES: Amateur Service 70.0-70.5 MHz   Secondary User: 160W (22dBW) Maximum
	Available on the basis of non-interference to other services (inside or outside the UK).
	Notes to the Band Plan
	ITU-R Recommendation SM.328 (extract)
	Necessary bandwidth: For a given class of emission, the width of the frequency band which is just sufficient to
	ensure the transmission of information at the rate and with the quality required under specified conditions.
	The use of Amplitude Modulation (AM) is acceptable in the all modes segments but users are asked to consider
	adjacent channel activity when selecting operating frequencies.
	Foundation and Intermediate Licence holders are advised to check their licences for the permitted power limits and
	conditions applicable to their class of licence.